Control Cabinets

SEA SYSTEMS has designed different types of Control cabinets for lifts both with electric and hydraulic traction in simplex, duplex, triplex configuration.

SEA SYSTEMS has developed a type of Control Cabinet for platforms (Home lifts)

Possible way of use:

  • Modernisations of electric and hydraulic lifts;
  • Lifts with or without machine room (gearless);
  • Lifts with short headroom and/or low pit (EN 81.21);
  • Lifts for disabled (EN 81.70);
  • Fire-fighting and fireman operation (EN 81.72, EN 81.73);
  • Moving platforms (EN 81.41)

General Features:

  • Compliance with the standards EN 81-XX;
  • Control of the electric traction with 1/2 speed, with inverter 3VF in open / close loop;
  • Control of the hydraulic traction with direct starting, star/delta starting, Soft Starter starting, with the most common electronic valves;
  • Control of the calls in APB, down collective selective, up/down collective selective;
  • Control of multiplex (Duplex, Triplex and so on);
  • Control of manual doors, semiautomatic doors, automatic doors up to 3 operators with different drivers
  • Control of Fireman operations and Fire-fighting operations (EN81.72, EN81.73)
  • Control of the communication between the controller and the other electronic devices:
    -parallel with the car and the floors;
    -CAN with the car and parallel with the floors;
    -CAN with the car and the floors
  • Diagnostics and Programming of the parameters:
    -with LEDs on the main board displaying the in / out status;
    -with the usual terminal STK2-PM used with the previous controllers Setronik1 and Setronik2;
  • Control of the different parameter configurations and firmware updates with the USB key;
  • Control of the safety chain between 24Vdc to 230Vac;
  • Control of the signallings at 24Vdc 2W

Special features:

  • The main board STK1R (Setronik1 Restyling) can replace the previous main board STK1b (Setronik1) without any electric or mechanical changes;
  • The usual terminal STK2-PM for diagnostics and programming with the previous Setronik1 and Setronik2 works also with the new Setronik1 Restyling;
  • Pre-wiring with connectors without other wiring operations during the installation;
  • Control of the position and speed through:
    -Magnetic contact sensors on the car roof;
    -Encoder on the car roof (supplied by Sea Systems);
    -Encoder on the motor in electric lifts

In our latest and state-of-the-art line of control cabinets Setronik1 Restyling you can find all the features of the previous control cabinets line Setronik1 (STK1).

We kindly ask you to visit our web site and to pay particular attention to the description of the controller Setronik1 Restyling (STK1R) for further information.

Sea Systems is always on hand to provide you with the spare parts of the previous controller Setronik1 (STK1)

In our latest and state-of-the-art line of control cabinets Setronik1 Restyling you can find all the features of the previous control cabinets line Setronik2 (STK2).

We kindly ask you to visit our web site and to pay particular attention to the description of the controller Setronik1 Restyling (STK1R) for further information.

Sea Systems is always on hand to provide you with the spare parts of the previous controller Setronik2 (STK2).

In our latest and state-of-the-art line of control cabinets Setronik1 Restyling you can find all the features of the previous control cabinets line Setronik3 (STK3/GMV10).

We kindly ask you to visit our web site and to pay particular attention to the description of the controller Setronik1 Restyling (STK1R) for further information.

Sea Systems is always on hand to provide you with the spare parts of the previous controller Setronik3 (STK3/GMV10)